Binding Parts and Accessories

Sold in Pair  

For added bite on icy, technical skin tracks and ski mountaineering objectives, the Fritschi Traxion crampon offers quick and easy attachment and f...

An extremely compact low profile minimalistic tool specifically designed for Split boarders, with all the features you need and none you don't. 10...

Kreuzspitze SGT: "Race" walk mode covers to enable switching between modes without having to rotate the heel piece. Comes in pair Kreuzspitze AG...

Mounting Screws: T20 head screws to mount bindings directly on the skis. Adjustment screws: one screw and one nut included. Used to attach bindi...

Device ski brakes to be mounted under the heel units that have a Dynafit TLT Speed mounting pattern. The ski stopper is held in the closed position...

The "U-Bow" is Marker's name for the "U" spring / pins used in the Marker Alpinist ski touring bindings heel units.Available in three different sti...

Super light brakes for the Marker Alpinist Binding. Available in 3 brake sizes to fit almost any ski. - Sold in Pair  

Crampons from Marker. Compatible with Duke PT bindings. They are lightweight and slide easily into the toe piece, eliminating the need to step out ...

Replacement brakes for the Marker Kingpin Binding.  - Sold in Pair  

Crampons for all Alpinist & Kingpin binding models Pintech crampons from Marker. Compatible with Kingpin and Alpinist bindings. They are lightw...

Guide Mounting Screws: Mounting screws for the Guide Binding Race/Yak Mounting Screws: Mounting screws for the Race and the Yak bindings Race ...

These bindings were originally built for competition but the R170 went beyond it’s initial purpose and is now sought after by all seasoned skiers l...

SINGLE removable crampon slot developed for PLUM crampons. Compatible with  R120 / R150 / R170 / OAZO / WEPA / PIKA / SUMMIT / GUIDE. You will need...

Compatible only with the latest-generation Oazo and Pika (2022 and Newer) Light, removable and extremely easy to handle ski-brake. Safety without d...

Compatible only with the previous generation Pika (Pre-2022) Light, removable and extremely easy to handle ski-brake. Safety without drawbacks. Ski...

The 40 mm adjustment plate is an accessory for models R99 and R150, offering adjustable ranges for different shoe sizes.    By adding an adjustable...

Stopper for skimo racing, which fulfills ISMF requirements. Compatible with the R120, R150 and R170 bindings. Weight: 30g per foot

Plum R150/170 Plum Guide 12  Sold Individually

Super fast, it is not necessary with this system to slide the crampons on the side of the binding to put it in place!All you have to do is position...

Leashes can be very valuable if you’re prone to dropping your skis off a mountain. The Plum leashes are a coiled cable and carabiner that can be hi...

Service parts for Plum split board bindings.   Ankle Straps NOW Lg (2x): Size Large upper straps for soft boot binding Ankle Straps NOW Sm (2x):...

Pair of Crampon Slots for splitboard crampons  

Hook WOM Pack for splitboard (4 hooks)

4.1mm X 9.5mm Drill Bit: A stepped drill bit from Sun Valley Ski Tools.  4.1mm X 9 mm Drill Bit : A stepped drill bit from Sun Valley Ski Tools....

Gara Titan Steel 5.0: The stiffest release for the Gara binding with a steel u-spring. Gara Titan Steel 4.5: The intermediate release for the Ga...

Steel U-Springs (5.0): The stiffest (R12) replacement heel springs for Gara Titan and Vario.1 bindings. Comes in pairs Gara Titan Easy Lever k...

Sold individually with necessary hardware. You will need two for a pair. 

Leashes. What else is there to say?

Lightweight plate that adds "flex compensation" or "elasticity" at the heel piece and widens the mounting pattern. Compatible with Gara, Gara Tita...

Performance Spacer: A "freeride" spacer that increases power transmission by eliminating the heel gap under your boot. Comes in a set with 1.5, 2...

Replacement brakes for Tyrolia Almonte tech bindings. Please note all brakes are sold as a pair.

Touring leash (1 pair)Includes leash loop (4 pcs.)