Plum Binding Parts

• Race Heel Risers (pair):  Removable heel riser placed in the steel fork on race bindings

• Stainless Steel Forks (pair): Replacement forks for Race 135/145/150/170 bindings. RV of approx. 8 vertically. 

• Oazo 6 Steel Forks (pair): Compatible with Race 150/170 and Oazo bindings to set the release values to approx. 6 vertically.

• Titanium Forks (pair): Compatible with R99 and R120 bindings only

• Guide / Yak Brake (pair): The brake part for a Plum Guide. This does not include the longer base plate that comes with the brake version of the Guide, but only the brake itself. 

• Guide Heel Pads (pair): To complete your GUIDE 7 or GUIDE 12 touring binding the heel pads reduce stress on the pins and allow better transmission of effort between the boot and the ski. Sold in pairs.

• Race 150 Offset Bases (pair): If you’ve changed your boots but not your skis, the offset heel block can allow you to gain 2,3 or 4 mm and avoid drilling your skis! Compatible only with the R150 touring bindings. This piece must be changed by a professional supplier.

• R170 Wide Rail (pair): Wide mounting plate for Oazo and R170 binding that is compatible with the Pika/Guide and Dynafit Speed heel pattern. Sold as a pair.

• R150 Valves, pins and PTFE washers (pair): 2 x Valves, 2 x pins and 4 x PTFE washers

• R150/R170 Toe lockers, springs and locking axis (pair): 2 x Toe lockers, 2 x springs, 2 x pins and 2 x locking axis

• Oazo Toe lockers, springs and locking axis (pair): 2 x Toe lockers, 2 x springs, 2 x pins and 2 x locking axis

• Oazo high heel riser (Single, Orange): High heel riser for the Oazo 4/6/8 binding. Orange

• Oazo body, cork, spring, ball, pin (single): 1 x plastic body, 1 x cork, 1 x adjustment spring, 1 x ball and 1 x pin to reassemble a Oazo body.

• Pika heel pad (single): 1 x Heel pads and 1 x screw (M4 x 20 mm)

• Pika heel riser, pin and elastic plate (single): 1 x Heel risers, 1 x locking pin and 1 x plastic plate.

• Pika forks and pads (pair): 4 x heel forks, 4 x Pads and 2 x forks guide

• Pika/Wepa toe lockers, springs and locking axis (pair):  2 x Toe lockers, 2 x springs, 2 x pins and 2 x locking axis

• Pika hood, screws and release adjustment screw (single): 1 x Hoods, 4 x screws 3/20, 1 x release adjustment screw

• Pika/Wepa plastic body, cork, spring, ball, pin and pad (single): 1 x plastic body, 1 x cork, 1 x adjustment spring, 1 x ball and 1 x pin to reassemble a Pika/Wepa body.

• Guide/Yak forks and pads (pair): 4 x heel forks, 4 x Pads and 2 x forks guide

• Guide/Yak toe lockers, springs and pins (pair):  2 x Toe lockers, 2 x springs, 2 x pins and 2 x locking axis.

• Guide plastic body, screw, spring, plastic cork and pad (single): 1 x Plastic body, 4 x screws, 1 x little springs, 1 x big springs, 1 x plastic cork, 1 x aluminium cork

• Guide/Yak hood, screws and release adjustment screw( single): 1 x Hood, 4 x screws, 1 x release adjustment screws

• Summit Toe Plates (pair): Toe shims that work for all Plum toe pieces, but that come stock with the Plum Summit and Summit Brakeless. Provides a 8 mm lift up front to reduce the heel/toe height discrepancy. Sold in pairs with necessary hardware.

• Pika Heel Riser Plastic shim (Single): Heel riser plastic shim for locking heel riser in place. Comes with new pin. Sold as Single

• Oazo Low Heel Riser + Plastic Shim + Pin (Single, Orange): Replacement lower heel riser fro Oazo 4/6/8. Includes plastic locking shim and pin. Single, Orange.

• Oazo High Heel Riser (Single, Turquoise): High heel riser for the Oazo 4/6/8 binding. Turquoise

• Oazo Low Heel Riser + Plastic Shim + Pin (Single, Turquoise): Replacement lower heel riser fro Oazo 4/6/8. Includes plastic locking shim and pin. Single, Turquoise.

• Oazo Heel Riser Plastic Shim (Single): Replacement plastic locking shim for Oazo heel riser. Comes with pin. Single

• Oazo 4 steel fork: Replacement steel forks for Oazo bindings with release value of 4. Sold as a pair.

• R150 Plastic Body: Replacement plastic housing for R150 heel tower including the internal springs (x2), balls (x4) and pins (x2). Sold as a set for two heels.

• Pika Hood/Top shelf (Single): Replacement top shelf for Pika heel. Includes 4x screws for housing and 1x rv adjustments screw. No heel riser or internal springs. (Single)

We accept returns on eligible items within 15 days of delivery, provided the product is in like-new condition.

Footwear may be tried indoors only (home or treadmill). All returned items must be unworn beyond fit testing, include original manufacturer packaging and hang tags (fees may apply if damaged) and have been purchased from SkiUphill-RunUphill within the 15-day window. Apparel must be completely unworn.

Final Sale / Non-Returnable Items
All sale items are final sale. The following items are not eligible for return: carbon-plated running shoes, avalanche safety equipment (transceivers, shovels, probes, airbags), climbing equipment (ropes, harnesses, carabiners, belay devices, slings), ski crampons, helmets and gift cards.

Return Process & Fees
International returns are not accepted. A 10% deduction applies to all refunds to cover credit card processing and administrative fees.

For more information on returns and exchanges, click here.